1、Test and analyze battery load system, indicating battery condition include battery life percentage, CCA, battery voltage,battery resistance. 2、Continuous test with battery power, no damage to battery, and the reverse polarity and over voltage protection make it to be ultra safe. 3、Complete wide CCA test range (100-1700), offer reliable and accurate operation for more sized batteries. 4、Great compatible with most 12 volt battery type(include Flood battery, AGM battery, Gel battery, Deep Cycle Battery), work fast and precisely. 5、Come with large LED screen and heavy duty clamp, and beep remind function make it to be more durable and reliable. 6、With compact shape, stable performance, shockproof, lightweight and portable, take up no space and you can put it anywhere.
Specification
Item Type: Battery Tester
Material: ABS
Color: As shown in the picture
Host Size: Approx. 13×6.2×2.8cm / 5.1×2.4×1.1in
Weight: Approx.261g/9.2oz
Input Voltage: DC12V
Test Items: Voltage, resistance, CCA, battery condition
Applicable Object: 12V battery
Wide Operating Range :
CCA: 100-1700
DIN: 100-1000
IEC: 100-1000
En:100-1700
Battery Life Percentage:
80% – 100% Good Condition
60% – 80% OK, Not Bad
40% – 60% Need Attention
0% – 40% Bad, Need to Exchange Required
How to Use
1. Power of the analyzer is supplied by the vehicle battery.For testing，the clinchers of the analyzer should be clinched correctly on the battery during is testing.（Red clincher means positive terminal and black clincher means negative terminal which should be clinched correspondingly on the terminals of the battery.
2. Turn on and input
a. Press the power button for 1 second
b. The screen gets lightening and Bee alarm will emit a "B"sound.
The screen shows moving digits, all test indexes and low battery caution index.
c. Press "OK"it gets into the step of CCA (Cold Cranking Ampere) value input
d. The third digit on the right of the four digits number index blinks, it means the indication digit is changeable by UP(increasing) or DOWN(decreasing) function button. Press the UP(increasing) or DOWN(decreasing) function button until the correct digit shows and move to next digit place for value-input by pressing "SEL".
e. The units digit on the right if the four-digits number carries each time 5 units in adding, the other digits carry once an unit in adding.
f. After input steps are completed, press"OK", the analyzer will start testing mode for 10 seconds.
The Bee alarm keeps emitting "Be"sounds when the testing mode is closed. Press any button to stop the "Be"sounds.
If the voltage of battery is too low. the "low"sign at the below left position on the screen will flash, please recharge the battery and test it again.
Package List
1 x Battery Tester
1 x Instruction Manual
Note
1. Please allow 1‑2in error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Products received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with local consumer laws. We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. Please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery & returns: ships from Australian warehouses, usually within 5–12 business days. A few very remote postcodes can’t be reached by our couriers — if yours is one, we’ll contact you before dispatch. Faulty or damaged items are covered under the Australian Consumer Law.
