1、The water storage container is free to choose, there is no fixed faucet limit, and you can water where you want to water. 2、Weak current protection function, when the battery power is low, the device will automatically stop watering to protect itself. 3、Three power supply modes are available: USB plug power supply, plug power supply and battery power supply (battery not included). Free and convenient, can be used anywhere. 4、The built‑in suction pump, has 2.5m lift height, and there is no need to worry about the height of the flowerpot. 5、Intelligent automatic timing watering, watering parameters can be set freely according to needs to meet the needs of different plants.
Specification
Item Type: Watering Timer
Material: ABS+PP
Color: As shown in the picture
Product Size: Approx. 9.7×8.5×8.5cm / 3.8×3.3×3.3in
Weight: Approx.819g/28.9oz
Battery: 4 x AA batteries (not included)
Rated Current: 720mA
Interface Diameter: Φ4.8mm / 0.19in
Supporting Pipeline: 4/6, 4/7
Maximum Water Pressure: ≥30psi (200pa)
Flow: 0.3-0.8LPM
Noise: ≤65db (30cm / 11.8in distance)
Working Temperature: 0-50℃
Lift Height: ≥2.5m/8.2ft
Suction Lift Height: ≥2m/6.6ft
Application: Garden sheds, flower beds, patios, courtyards, balconies, offices, etc.
Two modes of operation process:
1. Manual mode:
a. Power on, press and hold the switch button for 3 seconds to start the watering controller;
b. Click the set button to select a pump port;
c. Click the "open/close" button, the pump starts to run;
d. Click the set button and select the pump port;
e. Click the "Open/Close" button to stop the pump
2. Set automatic mode:
a. Power on, press and hold the switch button for 3 seconds to start the watering controller;
b. Click the set button to select a pump port;
c. Click the set button to set the watering time;
d. Click the set button to set the interval time;
e. Click the set button to set the number of cycles;
f. Click the set button, it will automatically stop running after watering
Package List
1 x Watering Timer(Battery Not Included)
1 x Power Adapter
1 x USB Cable
20 x Dripper
20 x Tee
1 x Hose(15m)
2 x Filter
1 x Cross Screwdriver
1 x Instruction Manual
Note
1. Due to the water level difference of the closed pipeline, the pipeline will have a siphon effect. Just adjust the relative position of the dripper and the water source to solve this problem.
2. It is generally recommended that the water source be placed on the ground, and the dripper should be higher than the water level.
3. The dripper must be inserted in place, otherwise it will cause insufficient water for the dripper behind.
4. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.
Products received faulty, damaged, or not as described are eligible for a return, refund, or replacement in accordance with local consumer laws. We are committed to ensuring all products meet the standards of quality and reliability expected by our customers. Please note that we do not accept returns or provide refunds for change of mind. We encourage you to carefully consider your purchase to ensure it meets your needs and expectations.
Delivery & returns: ships from Australian warehouses, usually within 5–12 business days. A few very remote postcodes can’t be reached by our couriers — if yours is one, we’ll contact you before dispatch. Faulty or damaged items are covered under the Australian Consumer Law.
