Product Title
Door Lock and Latch Installation Tool Kit with Hole Saw, Mortise Template and Chisel Guide for Wooden Door Hardware Fitting and Precise Drilling Alignment
Product Description
Installing a door lock or latch can quickly turn into a frustrating chore when you are guessing at alignment and struggling to keep your tools steady. This door latch installation tool kit brings together everything you need to mark, drill and chisel with confidence, so a clean and professional fitting is within reach for both first-timers and seasoned hands. The set includes a long-handle mortise chisel guide, a frame-shaped template with dual circular openings, a cylindrical hole saw and a connecting rod with a pilot drill tip. Each locating accessory is made from durable engineering plastic, while the cutting and drilling components are built from sturdy metal to handle repeated use. The kit accommodates doors with a thickness of 1-3/4 inches or 1-3/8 inches, and it supports two common latch backset distances of 2-3/8 inches and 2-3/4 inches, covering the most frequently encountered residential door setups. The chisel guide measures 165mm by 58mm, the template measures 100mm by 68mm by 44mm, and the hole saw comes in 2-1/8 inch and 1 inch sizes. Whether you are replacing a worn latch or fitting a brand-new lockset, this kit helps you measure twice, cut once by keeping every opening and slot exactly where it belongs. The thoughtful layout reduces the risk of overshooting your mark or damaging the door face, and the color options in yellow-black, blue-black, red-black and orange-black make the tools easy to spot in a crowded toolbox. Designed specifically for standard wooden doors, this kit streamlines the whole process from first mark to final screw, letting you finish the job faster and with a neater result.
Key Features
Complete Installation Set: Includes a long-handle mortise chisel guide, a frame-shaped template with dual circular openings, a cylindrical hole saw and a connecting rod with a pilot drill tip for a full door lock fitting workflow.
Mixed Material Construction: Locating accessories are made from engineering plastic for lightweight handling, while the drilling and chiseling components are crafted from metal for reliable cutting performance.
Adjustable Door Compatibility: Fits doors with a thickness of 1-3/4 inches or 1-3/8 inches and supports latch backset distances of 2-3/8 inches and 2-3/4 inches.
Precise Dimensions: The chisel guide measures 165mm by 58mm, the template measures 100mm by 68mm by 44mm, and the hole saw is available in 2-1/8 inch and 1 inch sizes.
Four Color Options: Available in yellow-black, blue-black, red-black and orange-black combinations to suit personal preference and easy identification.
Important Notes
Intended Use: This kit is designed for standard wooden doors only and is not suitable for metal, density board or hardwood doors.
Tool Disclaimer: This product is a manual installation aid and is not intended to diagnose, treat or cure any condition; always follow safe handling practices.
Measurement Check: Confirm your door thickness and required backset distance before starting, as compatibility depends on matching these specifications.
Cutting Caution: Wear appropriate eye and hand protection when using the hole saw and chisel guide, and keep hands clear of sharp edges.
Care and Storage: Clean and dry all components after use, and store the kit in a dry place to prevent rust on metal parts and warping of plastic parts.
Delivery & returns: ships from Australian warehouses, usually within 5–12 business days. A few very remote postcodes can’t be reached by our couriers — if yours is one, we’ll contact you before dispatch. Faulty or damaged items are covered under the Australian Consumer Law.
