Floor Drain Set European Style Antique Copper Shower Drain Bathroom Toilet Accessory

Installation Steps: 1 x Floor Drain 1 x Filter Screen 1 x Drain Cover

• The built‑in porous and high dredge filter screen, anti‑blocking, anti‑reflow and anti‑odor.
• Effectively block the flying insects in the pipeline and solve the odor problem from the root cause.
• The filter is designed to reduce drainage clogging and prevent hair from entering or clogging.
• Selected high‑quality copper materials, durable and long‑lasting, corrosion‑resistant.
• Hand‑brushed process, European retro appearance design, beautiful and practical.
• Wide range of uses, suitable for kitchens, bathrooms, garages, basements, toilets and balconies.
• First find a good water slope to ensure that the water can flow in from all positions, leave the tiles on the side of the floor drain, measure the size, and cut the gap to achieve the perfect effect.
• Cut the tiles and place them. For example, the floor drain size is 10cm x 10cm and cut to 10.5cm. Leave a little gap appropriately.
• Brush the cement mud around the back of the floor drain to make it adhere firmly to the ground and not brush too much.
• The center of floor drain faces the center of the drain pipe, put it into the pipe, and press it firmly. The floor drain level should be slightly lower than the tile surface.
• Wipe off excess cement and clean up ground garbage.
• After the cement is dry, install the floor drain core, which can be taken out for cleaning at any time.
• Close the panel cover, and the installation is complete.