G1/2 Square Water Faucet Full Copper Single Cold Faucet Washing Machine Tap Hardware Fitttings

Installation Steps: Note: Do not use a wrench to force the installation to avoid damage to the product. 1 x Washing Machine Tap 1 x Decorative Cover

• All copper material, gravity casting, anti‑corrosion and anti‑rust.
• Thick and durable, explosion‑proof, anti‑freezing and anti‑cracking.
• Black paint process, simple structure, stylish shape, personalized, and color‑fast.
• G1/2 thread washing machine faucet (suitable for washing machines of general brands).
• The thread is tight, stable and durable, and the tightly connection without leakage.
• Before installation, water must be drained to flush out the sediment and other debris in the pipeline;
• Put the decorative cover into the angle valve inlet;
• Wrap the PTFE tape on the threaded end of the corner break into the water, and screw into the embedded pipe by hand;
• Use a screwdriver to insert the water outlet and rotate it clockwise until the angle valve is tightened, and the angle of the angle valve water outlet is adjusted;
• Open the pipeline valve and check whether the threaded connection part is well sealed. If there is no water leakage, the installation is successful.