Magnetic Pet Screen Door 4 Way Locking Cat Flap Door for Interior Exterior Doors Sliding Screen Door, Window Wall Entry Pet Door

4 WAY SWITCH MODE --- The pet door could be adjusted by the switches with tabs at flap to 4 modes: out only, in only, both in and out, and fully locked, easy control of your pet's in and out. SIZE & APPLICATION --- Outer Size: 11.42" x 9.45" x 0.39"(H x W x D), Inner size: 9.45" x 7.48"(H x W), Cut-Out Size: 9.45" x 7.48" (H x W), suitable for cat and doggie lighter than 26 lb and waist circumference shorter than 23.6". AUTOMATIC CLOSE & LOCKABLEL --- Pet door with magnetic flap closures, built-in magnetic can keep the door automatically closed when your cat or dog leaves. EXCELLENT QUALITY --- Our cat door frame is made of high quality ABS material, the mesh yarn is made of premium metal and is strong and durable. EASY TO INSTALL --- Complete instructions included, make you easily install in screen door, panels and patio or any other screen areas etc. Product Information: Package Includes: 1 * Pet Screen Door 1 * Specification Product Features: This dog door is consist of removable type of hanging inner door, which is anti-breaking and falling off. The material surface is smooth, thick, abrasion-resistant for longer life. This dog screen door is composed of inner and outer 2 parts of doors combination, please read our installation instructions before install. The plug tab is used to work as lock to control pet in or out. The magnet is for aligning the 2 parts of doors to close after swings. Installation Procedure

• Lay down the screen door,in the middle is the inner door,outside is the outerdoor frame.
• Firstly,draw a dimension drawing of the door cover with a piece of paper, and draw it on the door with a pencil.
• Cut the screens down the dog door frame.
• Install the screen door at the lowest place,and let the pin buckle pass through the screen door.
• Align the inner door panel with the groove of the outer door frame,andalign the other half of the door with the upper and lower pinholes and press down.
• Twist the screw to complete the installation.