Rainfall Sensor RS485 Aluminum Alloy IP65 Rain Gauge Rainfall Amount

$392.95

1、Aluminum Alloy Construction: Made of premium aluminum alloy material, the rainfall sensor is sturdy and long lasting, capable of operating normally in high temperature and damp environments. 2、Precise Raindrop Measurement: Utilizes a drip sensing design principle with a special internal structure for accurate control of raindrop size, combined with optical sensing principles for raindrop counting to measure rainfall volume. 3、RS485 Output Signal: The rainfall monitoring gauge operates on 9 to 30V power supply voltage, providing precise measurements and high reliability for data transmission. 4、Compact and Lightweight: With no moving parts, the rainfall amount sensor module is compact and portable, easy…

In stock – ships from an Australian warehouse

Usually arrives Tue 24 Nov – Wed 2 Dec
Ships from an Australian warehouse in 1–2 business days. Delivery is calculated at checkout for your postcode.

Or 4 interest-free payments of $98.24 with afterpay zip

  • 🔒 Secure checkoutEncrypted card payments
  • ↩️ 14-day returnsChange-of-mind, ACL covered
  • 🇦🇺 AU support0417 303 532

Safe and secure checkout

In stock – ships from an Australian warehouse

1、Aluminum Alloy Construction: Made of premium aluminum alloy material, the rainfall sensor is sturdy and long lasting, capable of operating normally in high temperature and damp environments. 2、Precise Raindrop Measurement: Utilizes a drip sensing design principle with a special internal structure for accurate control of raindrop size, combined with optical sensing principles for raindrop counting to measure rainfall volume. 3、RS485 Output Signal: The rainfall monitoring gauge operates on 9 to 30V power supply voltage, providing precise measurements and high reliability for data transmission. 4、Compact and Lightweight: With no moving parts, the rainfall amount sensor module is compact and portable, easy to install, less susceptible to wear, and simple to maintain. 5、Wide Application Range: Widely used in industries and fields such as smart agriculture, meteorology and environmental guard, smart irrigation, marine navigation, automated weather stations, automatic door and window, and geological disaster monitoring.

Specification

Item Type: Rainfall Sensor

Material: Aluminum alloy

Weight: Approx. 524.00g/18.48oz

Output Signal: RS485

Power Supply Voltage: 9 to 30V

Sensor Cable Length: Approx. 2.5m/98.4in (±5cm)

Product Size: Approx. 85x78mm/3.3×3.1in

Hole Spacing: Approx. 72mm/2.8in

Rainfall Mouth Diameter: Approx. 60mm/2.4in

Measurement Range: 0 to 4mm/min (measurements may become inaccurate beyond this rainfall intensity)

Resolution: 0.03mm

Accuracy: ±4% (static test indoors, rainfall intensity at 2mm/min)

Protective Level: IP65

Power Consumption: ≤0.24W (12V DC, current less than 20mA)

Operating Temperature: 0 to 65℃

Operating Damp: 0 to 99%RH (non condensing)

Widely Used in: Smart agriculture, meteorological environmental guard, smart irrigation, ship navigation, automatic weather stations, automatic door and window, geological disasters, etc.

Wiring:

Red Cable: Power positive

Black Cable: A+

Yellow Cable: B-

Green Cable: Power negative

CRC Check Steps:

1. Initialize a 16-bit register to hexadecimal FFFF, referred to as the CRC register.

2. XOR the first 8 bits of data with the low bits of the CRC register, and store the result back in the CRC register.

3. Right shift the content of the register by one bit (towards the lower order bits), fill the highest bit with 0, and check the lowest bit.

4. If the lowest bit is 0: repeat step 3 (shift again); if the lowest bit is 1: XOR the CRC register with the polynomial A001 (1010 0000 0000 0001).

5. Repeat steps 3 and 4 for a total of 8 shifts, processing the entire 8 bits of data.

6. Repeat steps 2 to 5 for the next 8 bits of data; the final CRC register obtained is the CRC code (with low byte first and high byte last).

Troubleshooting:

1. Incorrect displayed value on the instrument during RS485 output. Possible causes include wiring issues or communicating port faults leading to incorrect data retrieval. Check for proper and secure wiring connections, ensure the communicating port is not in use, and verify the port settings.

2. Instrument display value clearly deviates from actual conditions. Clean the sensor's water tank, funnel, etc., then conduct testing according to the experimental testing methods.

Package List

1 x Rainfall Sensor

1 x User Manual

Note

1. Please check the packaging for any damage and verify that the product model matches the one you selected. Do not connect the wires while they are powered; only connect them after confirming that everything is correct.

2. The length of the sensor wire can affect the product's output signal. Do not modify the components or wires that were already soldered at the factory.

3. The sensor should be regularly inspected to remove dust, dirt, leaves to prevent clogging of the upper tube (funnel) water passage. It is recommended to clean it once a month for long term operating, and it must be cleaned at least every three months.

4. If there is dirt on the inner wall of the hopper, it can be rinse

Delivery & returns: ships from Australian warehouses, usually within 5–12 business days. A few very remote postcodes can’t be reached by our couriers — if yours is one, we’ll contact you before dispatch. Faulty or damaged items are covered under the Australian Consumer Law.

Questions & answers

When will it arrive?

Most orders arrive Tue 24 Nov – Wed 2 Dec (2–7 business days after dispatch). It ships from an Australian warehouse in 1–2 business days and you get tracking by email.

How much is delivery?

Delivery is charged at the carrier rate for your postcode. Enter your postcode above for an estimate; the exact cost is shown at checkout before you pay. Bulky items cost more to send.

Can I return it?

Yes. You have 14 days from delivery for a change-of-mind return (unused, original packaging). Faulty items are always covered by the Australian Consumer Law.

Can I pay later?

Yes, pay in 4 interest-free instalments of $98.24 with Afterpay or Zip, or pay by card.

Who do I talk to if I need help?

Our Australian team: call 0417 303 532 or email support@placiddeals.com. We reply within one business day.

Frequently bought together

Total: $452.85

Rainfall Sensor RS485 Aluminum Alloy IP65 Rai…$392.95