Temperature Controller Intelligent PID Digital Incubator Thermostat Poultry Farming Supplies

1. Temperature Setting: In the normal display state of the meter, press the SET setting key to make the SV display in a flashing state, and find the number of digits required to set the temperature by pressing the 2. Parameter Setting: This parameter is used to set alarms, PID constants and other parameters. In the normal display state of the meter, press and hold the SET key for three seconds, the parameter display symbols will be displayed on the PV display, and the corresponding value will be displayed on the SV display. Press the "SET" key in turn to display in turn And cyclically display parameter display symbols. In the normal display state of the meter, press the parameter setting to enter and find the data lock parameter LCK, set its codes to 1000, and then press the SET key to confirm the meter, press the SET key key at the same time, about 3 seconds later, When COD=0000 is displayed on the PV display screen, press the SET key in turn to display and cyclically display the technical parameter display symbols. 1 x Incubator Thermostat

• The digital temperature controller is intelligent and stable, with multiple sensors and free input.
• Precise temperature control, support various signal input, automatic correction of sensors.
• Digital temperature controller adopts high‑definition display for easy reading and operation
• The digital temperature controller uses high‑accuracy chips, and the temperature sensor control sensitivity is high.
• Made of high‑quality plastic, wear‑resistant, durable, not easy to damage, and can be used in various environments.
• Setting of technical parameters such as input type, temperature range, alarm mode, etc.