Welding ROd, 50 pcs 2.0Mm Low Temperature Aluminum Welding Electrodes - Easy Melt Welding ROds - Corrosion Resistance

It only requires a small heating device. The weld strength after welding is generally higher than the strength of the base metal itself. Very convenient and easy to weld. It also has a low melting point, high weldability and corrosion resistance, high thermal conductivity, high electrical conductivity and excellent processing properties. Welding effect: It can repair the aluminum alloy that some people think cannot be repaired, even the heavily corroded or oil-contaminated white metal can be repaired Applications: This low temperature aluminum welding wire can weld almost all white metals, including aluminum, aluminum alloy, cast aluminum, aluminum magnesium alloy, etc High strength, good forgeability and good corrosion resistance. Step 2: Heat the surface of the base metal until the temperature reaches the working temperature of the welding wire of 450°C or above, so that the weld can be formed by the heat conduction welding wire of the base metal, and the flame welding wire should not be used, and when the surface temperature is sufficient, the wire can flow and penetrate well Step 3: When repairing relatively thin aluminum, simply heat the aluminum to a suitable working temperature, and then use a wire and a wire brush to rub back and forth to form a weld The surface must be cleaned. 2. The temperature of the base metal must be maintained at 450°C during the welding process, and the temperature cannot be lower. 3. Avoid using flames to deliberately burn the wire. After the temperature reaches 450°C, the wire will naturally depend on the thermal conductivity of the base material..