Wireless Swimming Pool Thermometer Solar Powered Floating Water Thermometer with LCD Display

Press the mode/set key to switch and view the alarm time and current time Long press the mode/set key to enter the setting mode Simply press the MEM button to check the temperature large and small values Press the MEM button for more than 2 seconds to clear all temperature and history records Press the CH/+ button to convert and display the data of different RF channels Long press the CH/+ key to clear the data of the current display channel and enter RF reception Press the CF/- button to switch C/F Press the Snooze button to turn on the backlight for 5 seconds. Press the mode / set button to switch the display mode to the time mode. In the time mode, long press this key to enter the setting mode The set item will flash at 1Hz frequency Press mode/set to confirm the setting result Simply press the CH/+ button, and the set value will increase by one step. If you press it for more than 2 seconds, the set value will advance at the speed of 8 steps per second Simply press the CF/- key, and the set value will be retreated one step. If you press it for more than 2 seconds, the set value will be retreated at the speed of 8 steps per second When the key is not operated within 30 seconds, it will automatically exit the setting mode and the set value will be saved Long press the mode/set key to enter the setting mode The set item flashes at 1Hz frequency The setting sequence is: hour, à minute, à SNZ time (1-20 minutes, 5 minutes by default) à and exit the setting Simply press the CH/+ button, and the set value will increase by one step. If you press it for more than 2 seconds, the set value will advance at the speed of 8 steps per second Simply press the CF/- key, and the set value will be retreated one step. If you press it for more than 2 seconds, the set value will be retreated at the speed of 8 steps per second Press mode/set to confirm the setting result When the key is not operated within 30 seconds, it will automatically exit the setting mode and the set value will be saved When Al time is displayed, press CH/+ key to switch al When the alarm is ringing, press snooze/backlight to delay the alarm, and press other keys to exit the alarm 1 x Wireless Receiver (Without Battery) 1 x Swimming Pool Thermometer (Without Battery) 1 x Manual

• Floating on Water: The thermometer can float on the water and test the temperature of the water, so you can know the temperature of the water accurately.
• Multi Function: You can set temperature alarm, nap alarm, display indoor and water temperature, month, date, week, time and receiving channel, which is powerful and reliable.
• Stable Performance: It can receive three 433MHz channels and the water temperature at up to three positions, which is practical and professional.
• Convenient Operation: With clear LCD display, the temperature data is clear at a glance. The receiver panel is equipped with main keys for easy use.
• Widely Application: It is suitable for measuring the water temperature of swimming pool, pond and spa. It is widely used. It is a good measuring tool for swimming pool.
• 1 normal mode:
• 2 time setting mode.
• 3 alarm setting — Press the mode/set button to switch the display mode to the alarm mode
• 4 temperature alarm setting — Long press the C/F key to display that the of bathtub temperature alarm is off, and then press the C/F key to display that the bathtub temperature alarm is on. Then press the mode/set key, press the C/F key respectively, and press the CH key to set the required bathtub temperature alarm. If it is higher than this temperature, it will alarm. Then press the mode/set key, press the C/F key respectively, and press the CH key to set the required bathtub temperature alarm. If it is lower than this temperature, it will alarm. Press the mode/set key again to display that the indoor temperature alarm is off. Press the C/F key to display on, and the indoor temperature alarm is on. Then press the mode/set key, press the C/F key respectively, and press the CH key to set the required indoor temperature alarm. If it is higher than this temperature, it will alarm. Then press the mode/set key, press the C/F key respectively, and press the CH key to set the required indoor temperature alarm. If it is lower than this temperature, it will alarm.