Woodworkers Edge Rule 20 Inches High Precision Protractors Angles Measure Tool Carpenter Tools, 20 inches

Simply press the head to the desired angle and press in a straight line. Thin satin-finished stainless steel blades are easy to read and minimize parallax errors. The perfect layout tool for woodworking: Even if you don't use angles, this is a layout tool. Design line notches are found in our new Stainless Steel Precision Carpentry Grilles. Features: Close tolerance indexing pins. The pin snaps into place, giving you confidence that it's in place. Description: Packing list: 1 x Woodworking Ruler

• The head can be adjusted from 0 to 70 and fixed every 5 times (+22-1/2 and 67-1/2) to give you an accurate reference angle and length respectively.
• Both edges of the blade are engraved with 1/32" inch graduations. regular raises
• The ruler has a total cumulative error of.004" over the length of the blade.
• Almost any project can be done. Saw blades have the same special teeth.
• There are notches every sixteen inches throughout the blade.
• Just place the pencil in the notch and slide the tip along the edge of the pencil to get a perfectly parallel line.