Buying guide
Motorcycle lift weight capacity: how much do you need?
Published 13 September 2026. Prices and stock last checked 13 September 2026.
The short answer
Start with your bike's wet weight, meaning its weight with fuel, oil and coolant, which the owner's manual or the manufacturer's specifications give. Add anything fitted to it, such as luggage or crash bars. Then choose a lift whose stated capacity is comfortably above that total rather than just above it: a rated capacity is a maximum, not a working target, and a load near the limit leaves no margin if the bike sits off-centre.
5 options in stock now
Motorcycle Jack 450KG Scissor Motor Bike Lift Stand Hoist Mini Motorbike Quad
$189.95
Free delivery within Australia · in stock
Why it is here: Capacity stated in both kilograms and pounds.
500kg Motorcycle Lift Scissor Jack Work Stand Motorbike Heavy Duty Bike
$109.95
Delivery quoted at checkout for your postcode · in stock
Why it is here: Scissor stand with capacity in its specification table.
Motorcycle Lift, 1200lbs Weight Capacity, Wide Deck Motorcycle Scissor Jack, 4.1-15 in Height Range, Heavy Duty Steel Bike Repair Center Stand with Ratchet and
$139.95
Delivery quoted at checkout for your postcode · in stock
Why it is here: Rated in pounds; see the conversion above.
Dirt Bike Lift Stand, Motorcycle Jack Lift Stand 440 lbs Capacity and Hydraulic Lift Operation, Adjustable Height Hoist Table, for Dirt Pit Bike Repair
$104.95
Delivery quoted at checkout for your postcode · in stock
Why it is here: Lighter-duty hydraulic stand rated in pounds.
500Kg Hydraulic Motorcycle Lift Motorbike Stand Bike Jack Hoist Lift Table
$754.95
Delivery quoted at checkout for your postcode · only 20 left
Why it is here: Lift table with its capacity in the specification.
Side by side
| Product | Price | Delivery | Stock |
|---|---|---|---|
| Motorcycle Jack 450KG Scissor Motor Bike Lift Stand Hoist Mini Motorbike Quad | $189.95 | Free (AU) | In stock |
| 500kg Motorcycle Lift Scissor Jack Work Stand Motorbike Heavy Duty Bike | $109.95 | By postcode | In stock |
| Motorcycle Lift, 1200lbs Weight Capacity, Wide Deck Motorcycle Scissor Jack, 4.1-15 in Height Range, Heavy Duty Steel Bike Repair Center Stand with Ratchet and | $139.95 | By postcode | In stock |
| Dirt Bike Lift Stand, Motorcycle Jack Lift Stand 440 lbs Capacity and Hydraulic Lift Operation, Adjustable Height Hoist Table, for Dirt Pit Bike Repair | $104.95 | By postcode | In stock |
| 500Kg Hydraulic Motorcycle Lift Motorbike Stand Bike Jack Hoist Lift Table | $754.95 | By postcode | 20 left |
Who this suits
Anyone comparing lifts and jack stands on capacity, or converting a pound rating to kilograms.
Who it may not suit
Anyone needing the capacity of a certified workshop hoist; check the documentation that comes with that equipment.
Dry weight and wet weight
Manufacturers often quote a dry weight, without fuel and fluids, because it is the smaller number. The weight a lift actually carries is the wet weight. Petrol weighs roughly three quarters of a kilogram per litre, so a full tank alone can add well over ten kilograms, before oil, coolant and anything bolted on.
Converting pounds to kilograms
Many lifts and jack stands are rated in pounds. One pound is 0.4536 kilograms, so 440 lb is about 200 kg, 1,000 lb is about 454 kg and 1,200 lb is about 544 kg. Where a listing gives both units and they disagree by more than rounding, treat it as a contradiction and check before relying on either.
Capacity is not the only figure that matters
A jack stand's lowest height has to fit under your bike, and its highest height decides how much working room you get. Its deck has to sit on a flat, solid part of the frame or engine. A table's platform length has to take your wheelbase, and its ramp decides how easily you can roll the bike on. Paddock stands are often rated per stand, with the front and rear stands each carrying only their end of the bike.
When a listing contradicts itself
Product listings are not always consistent. We have seen a lift whose title gave one capacity while its own specification table gave a different one. We do not quote a figure a listing contradicts, and we leave that product out of our recommendations until the listing is corrected.
The figures, from each listing
Motorcycle Jack 450KG Scissor Motor Bike Lift Stand Hoist Mini Motorbike Quad: stated capacity 450 kg; lift range 95–350 mm; platform 230 × 366 mm.
500kg Motorcycle Lift Scissor Jack Work Stand Motorbike Heavy Duty Bike: stated capacity 500 kg; lift range 90–370 mm; platform 370 × 230 mm.
Motorcycle Lift, 1200lbs Weight Capacity, Wide Deck Motorcycle Scissor Jack, 4.1-15 in Height Range, Heavy Duty Steel Bike Repair Center Stand with Ratchet and: stated capacity 544 kg.
Dirt Bike Lift Stand, Motorcycle Jack Lift Stand 440 lbs Capacity and Hydraulic Lift Operation, Adjustable Height Hoist Table, for Dirt Pit Bike Repair: stated capacity 200 kg.
500Kg Hydraulic Motorcycle Lift Motorbike Stand Bike Jack Hoist Lift Table: stated capacity 500 kg; lift range 215–780 mm; platform 1895 × 605 mm.
These figures are taken from each product's own listing and re-read daily. Check them against your bike before buying.
How this page was put together
How this page is kept honest: the guidance is written by Placid Deals from general workshop practice and the stated specifications of the stands and lifts in our range. We have not tested these products. Figures for individual products come from their own listings, are re-read every day, and are left out whenever a listing contradicts itself.
Part of the range guide Motorcycle Lifts & Stands, with every model we currently stock.
Questions and comments
Nothing here yet. If something on this page is unclear or you want a recommendation for your own situation, ask below — a person reads every one.